Honda Acura NSX 1991 Service Manual page 580

5 . Install the airbag assembly with new TORX@ bolts.
BOLTS
Replace
7 . Disconnect the short connector from the airbag
nector.
8. Connect the airbag 3-P connector and cable reel 3-P
connector.
Attach the short connector to the lid, and install the
lid on the steering wheel lower cover.
MAINTENANCE
LID
10 N-m (1.0 kg-m, 7 lb-ft)
Replace
con-
I
SHORT CONNECTOR
10. Connect the battery positive terminal and then con-
nect the negative terminal.
1 1. After installing the airbag assembly, confirm proper
system operation:
warning light should come on for about 6 seconds
and then go off.
switch.
make sure the yellow gear tooth still lines up with
the alignment mark.
YELLOW GEAR~TOOTH
ALIGNMENT MAR