Honda Acura NSX 1991 Service Manual page 387

Transmission
20. Install the right driveshaft onto the intermediate shaft.
21. Install the castle nut on the lower control arm at the knuckle.
22. Install the damper fork bolt.
23. Install the castle nut on the toe control arm at the knuckle.
CAUTION: Make sure that the arrow marks on the toe control arm are aligned.
24. Install the Anti-lock brake sensor wire clamp and parking brake cable holder.
25. Install the front exhaust pipe A.
26. Install the raer beam rod.
27. Install the parking brake cable.
SELF-LOCKING NUT
Replace.
10 x 1.25 mm
34 N%n (3.4 kg-m, 25 lb-ft)
GASKET
Replace.
60 Nom (6.0 kg-m,
43 lb-ft)
Assembly
Replace.
12 x 1.25 mm
85 N-m (8.5 kg-m, 62 lb-ft)
22 (2.2 kg-m, Replace.
16 lb-ft)
*SELF-LOCKING
1 2 x 1.25 mm
95 Nom (9.5 kg-m, 69 lb-ftl
(6.0 kg-m, 43 lb-ftl
Replace.
95 Nom (9.5 kg-m, 69 lb-ft)
10 x 1.25 mm
60 N-m (6.0 kg-m, 43 lb-ft)
SELF LOCKING NUT
10 x 1.25 mm
55 N-m (5.5 kg-m, 40-lb-ft)
NUT
DAMPER FORK BOLT
1 0 x 1.25mm
(4.4 kg-m, 32 lb+)
22 Nom (2.2 kg-m, 16 lb-ftl