Honda Acura NSX 1991 Service Manual page 1321

Mode G: SRS unit ground and component ground open.
CAUTION: Disconnect the battery negative termi-
nal and then disconnect the positive terminal. Con-
nect the short connector to the airbag assembly.
(See page 23-324).
1 . Connect the SRS test harness I3 between the SRS
unit and SRS main harness's 18-P connector.
2. Check for continuity between the 85,
and body ground.
SRS UNIT
terminal
SRS MAIN HARNESS
18-P CONNECTOR
replace and recheck the voltages according to the
chart on page 23-330.
control unit component grounds or the main har-
ness is faulty; check the ground (check wire and
control unit mounting bolts.) and, if necessary,
replace the main harness and recheck the vol-
tages according to the chart on page 23-330.