Honda Acura NSX 1991 Service Manual page 811

Troubleshooting
I
Turn the ignition switch OFF.
Install the fail-safe relay.
Disconnect the 20-P connector
from the TCS control unit.
Turn the ignition switch ON.
Measure the voltage between the
No.2 (RED/BLK) terminal of the
20-P connector and body ground.
Y E S
Turn the ignition switch OFF.
Connect the 20-P connector to
the TCS control unit.
(To page 19-l 25)
1 9 4 2 4
CONNECTOR
View from terminal side