Honda Acura NSX 1991 Service Manual page 658

Jack up the car and raise the wheels off the ground
(Section I 1.
Place the dial gauge on each front and rear wheel rim,
turn the wheel slowly by hand, and check the front/rear
wheel runout.
Front and Rear Wheel Axial Runout
Standard:
O-O.7 mm (O-0.028 in1
Front and Rear Wheel Radial Runout
Standard: O-O.7 mm (O-0.028 in)
Turn the wheel slowly by hand and check for excessive
axial and radial runout.
Bearing End Play
Front Wheel End Play
Standard: 0 mm (0 in)
Service limit: 0.05 mm (0.002 in) max. Replace.
Rear Wheel End Play
Standard: 0 mm (0 in)
Service limit: 0.05 mm (0.002 in) max. Replace.