Honda Acura NSX 1991 Service Manual page 479

11. Remove the parking brake cable holders from the rear beam rod.
12. Remove the rear beam rod.
13. Remove the front exhaust pipe A.
resistant bolt/nut
Corrosion
SELF-LOCKING NUT
Replace.
GASKET
14. Remove the parking brake cable holder and the anti-lock brake system sensor wire clamp.
15. Remove the castle nut and separate the control arm from the knuckle (See Section 18).
16. Remove the damper fork bolt.
17. Remove the castle nut and separate the lower control arm from the knuckle (See Section 18).
18. Remove the right driveshaft from the intermediate shaft.
PARKING
C A B L E H
DRIVESHAFT
SYSTEM SENSOR
WIRE/CLAMP
PARKING BRAKE
CABLE HOLDER
NUT
Replace.
P I P E A
R O D
14-97