Disassembly - Honda Acura NSX 1991 Service Manual

CAUTION: The bearing support and support base are
made of aluminum. Be careful not to damage them
when servicing.
Remove the intermediate shaft outer seal from the
bearing support.
2. Remove the external circlip and internal circlip.
EXTERNAL CklCLIP
3. Press the intermediate shaft out of the shaft bear-
ing using the special tool.
SHAFT
4. Remove the intermediate shaft inner seal from the
bearing support.
LIP
Hydraulic
press
HUB DWASSEMBLY
BASE
INNER SEAL
Replace.
16-13