Installation:
Install the dash fuse box.
1 .
KICK PANEL TRIM
2.
Connect the connectors to the dash fuse box.
NOTE: To reinstall the SRS main harness connector,
push it into position until it clicks, then close the con-
nector lid.
3.
Install the kick panel trim pieces.
4.
Disconnect the short connector from the airbag.
SHORT
CONNECTOR
LID A
SHORT CONNECTOR
5 .
6.
7.
8.
CABLE REEL
Connect the airbag 2-P connector and cable reel 2-P
connector.
Attach the short connector to the lid A and attach
to the steering wheel.
Connect both the negative cable and positive cable
to the battery.
After installing the dash fuse box, confirm that all
systems work properly.