Bleeding - Honda Acura NSX 1991 Service Manual

Bleeding

-Air Bleeding with ALB Checker
1 . Disconnect the 6-P inspection connecotor
from the connector cover located under the glove
box and connect the inspection connector to the
ALB checker.
ANTI-LOCK BRAKE SYSTEM
INDICATOR LIGHT
(US)
(Canada)
CAUTION: Place the vehicle on level ground with
the wheels blocked. Put the transmission in neutral
for manual transmission models, and in P for
automatic transmission
2. Fill the modulator reservoir to the MAX level.
NOTE: Do not reuse aerated brake fluid that has
been bled from the power unit.
3. Bleed high pressure fluid from the maintenance
bleeder with the special tool.
SOLENOID HEAD
PRESSURE SWITCH
UNIT
CONNECTOR
models.
4.0
4. Start the engine and release the parking brake.
NOTE: Depress the brake pedal firmly while test in pro-
gress light in ON.
5. There should be at least two strong kickbacks.
If not, repeat steps 2 through 5, as necessary.
6. Fill the modulator reservoir up to the MAX level.
7. Install the reservoir cap.
8. Check the anti-lock brake system function in all
modes by using the AL8 checker.
1 9 - 6 9