Honda Acura NSX 1991 Service Manual page 532

Transmission
12. Install the left driveshaft.
13. install the lower control arm to the side beam.
CAUTION:
Line up the reference marks on the adjusting bolt, adjusting cam and lower control arm.
14. Install the damper fork bolt.
15. Install the castle nut to the control arm at the knuckle.
CAUTION: Make sure that the reference marks on the control arm are aligned.
16. Install the anti-lock brake system sensor wire clamp and parking brake cable holder.
Replace.
12x 1.25mm
95 N.m (9.5 kg-m, 69 lb-ft)
14x 1.5 mm
125 N-m
(12.5 kg-m, 90 lb-W
17. Install the intermediate shaft and tighten the intermediate shaft mounting bolts to the intermediate shaft support base.
18. Install the intermediate shaft heat cover.
SET RING
DAMPER
F O R K B O L T
CASTLE NUT
. .vr..-..-.
\
Replace.
12x 1.25mm
Replace.
95 N.m (9.5 kg-m, 69 lb-ftl
10 N.m
6 x l.Omm
SET RING