Honda Acura NSX 1991 Service Manual page 1178

Taillights
1 . Open the trunk-lid and remove the rear trim panel.
2. Disconnect the 8-P connector and 2-P connector
from the taillight assembly.
3. Disconnect the 2-P connector from the trunk key
cylinder switch.
8-P CONNECTOR
4. Remove the 4 mounting nuts and rear panel, then
remove the 10 mounting nuts and the taillight as-
sembly.
NEW GASKET
REAR PANEL
TAILLIGHT ASSEMBLY
NOTE:
l inspect the gasket; replace if it is distorted or
overly compressed.
taillights, after installing the taillights.
23-l 92
2.
REAR TRIM PANEL
1 . Open the trunk lid and rear trim panel.
Turn the socket 45O counterclockwise to remove it
from the taillight housing.
BRAKE LIGHT/TAILLIGHT
3. Remove the bulbs from the socket.