11. Disconnect the connectors from the EPS wire
harness.
12. Remove the ground cable by removing the EPS wire
harness
stay.
E P S W I R E
HARNESS STAY
\
CABLE
13. Remove the terminal guard and ground cable.
14. Remove the terminal nuts and the wires from the
gearbox
terminals.
TERMINAL NUTS
EPS WIRE HARNESS
1.0 kg-m, 7 lb-ft
NOTE: After tight-
ening the terminal
nuts, bend up the
terminal tabs
against the nuts
securely.
TERMINAL
GUARD
15. Remove the radiator pipe bracket at the firewall.
RADIATOR PIPE
16. Remove the radiator pipe bracket at the floor, and
space the radiator pipe away from and gearbox.
RADIATOR PIPE
\