Honda Acura NSX 1991 Service Manual page 1257

-Motor Test
CAUTION: Be careful not to damage the seats, the
interior trim or the body.
1 . Remove the power seat, then disconnect the 2-P
connector from the sliding motor.
2. Remove the 2 screws then remove the power seat
switch from the power seat.
Disconnect the 5-P connector from the reclining
3.
switch.
Test
4.
CAUTION: When the motor stops running, discon-
nect
NOTE: When a motor does not run, reverse the bat-
tery terminal connection. If the motor still does not
run, the motor or the wire harness is defective.
5-P CONNECTOR
View from
wire side
motor operation.
a battery terminal immediately.
FORWARD
Connect battery positive to the No.
SLIDING:
6 terminal and negative to the No.
7 terminal.
BACKWARD
SLIDING: Connect battery positive to the No.
7 terminal and negative to the No.
6 terminal.
FORWARD
RECLINE:
Connect battery positive to the No.
4 terminal and negative to the No.
1 terminal.
BACKWARD
RECLINE:
Connect battery positive to the No.
1 terminal and negative to the No.
4 terminal.