Honda Acura NSX 1991 Service Manual page 677

Knuckle/Control Arms
Illustrated Index
Overall Suspension
NOTE:
l
Wipe off the grease before tightening the nut at the ball joint.
Torque specifications, see page 18-29.
*Corrosion resistant bolt/nut
UPPER CONTROL ARM BUSH
Check for deterioration
or damage.
UPPER CONTROL ARM
Check for damage or cr
BALL JOINT
Inspect for faulty
movement and
w e a r .
REAR KNUCKLE
Check for damage or
cracks.
LOWER CONTROL BALL JOINT
lnsoect for faultv movement
a n d w e a r .
NOTE: Replace the joint boot if any are damaged. The parts marked with an asterisk (*) have a retainer attaching
the ball joints. Replace the retainer whenever the boot is replaced.
CAUTION:
18-34
DAMPER REAR
Inspect for faulty
\
L O W E R
Check for damage or cracks.
TOE CONTROL ARM
Check for damage or cracks.
BALL JOINT
Inspect for faulty movement and wear.
striking
them with a hammer, and take care not to drop them.
STABILIZER BAR
BRACKET
Check for damaae.
*FLANGE BOLTS
1 0 x 1.25mm
60 N-m
I
STABILIZER
BAR
Check for
damage.
*FLANGE BOLTS
23 N*m
(2.3 kg-m, 17 lb-ftl
TOE CONTROL ARM BUSH
Check for deterioration
or damage.
A R M