Doors
19. Carefully lower the window until you can see its
mounting bolts, then remove the bolts. Pull the
glass out through the window slot.
NOTE:
to the regulator motor (See Section 23).
the original adjustment.
GLASS
GLASS GUIDE
20. Remove the 2 locknuts, then remove the front
glass
guide.
NOTE:
removing the locknuts.
original
adjustment.
FRONT GLASS_OUlD!'
I I
CORROSION RESISTANT BOLT/NUT
20-I 0
GLASS
BOLTS
8
LOCKNUT
BOLT
LOCKNUTS
22
16 lb-ft)
21. Remove the 4 regulator mounting bolts and looser
the 3 motor bolts, then take out the regulator
NOTE:
the
original
adjustment.
ASSEMBLY
x 1.0 mm
8
5.6
lb-ft)
22. Remove the mounting bolts, then remove the inside
stabilizers from the door panel.
NOTE: Scribe a line around the mounting bolts tc
show the original adjustment.
INSIDE STABILIZER
22