Honda Acura NSX 1991 Service Manual page 1166

Lighting System
-Retractor Switch Removal
All SRS wire harnesses and connectors
are colored yellow. Do not use electrical test equipment
on these circuits.
CAUTION: Be careful not to damage the SRS wire har-
nesses when servicing the lighting system.
1 . Remove the dashboard lower panel and disconnect
the 2-P connectors from the floor wire harness.
!-P
: O N
2. Remove the dashboard center panel.
3. Remove the tilt cover.
23-l 80
LOWER
PANEL
PANEL
TILT COVER
4. Remove the steering column lower cover and upper
cover.
5. Disconnect the 5-P and IO-P connectors from the
each switch.
RETRACTOR SWITCH
6. Remove the 6 screws, then remove the instrument
panel from the dashboard.
7. Remove the retractor switch from the instrument
panel.
TCS SWITH
-P CONNECTOR