Honda Acura NSX 1991 Service Manual page 686

5. Install the rear damper bar on the stud bolts of
damper as shown.
6.
Loosely tighten the new self-locking nuts.
REAR
*SELF-LOCKING NUT 10 x 1.25 mm
DAMPER
54 Nom (5.4
BAR ,
7. Secure the damper mounting nut and stabilizer link
nut.
8. Secure the damper assembly to the frame with the
self-locking nuts.
rear hatch glass garnish.
TAPPING SCREW
39 lb-ft)
kg-m,
I
REAR HATCH GL
GARNISH
Damper Disposal
The dampers contain nitrogen gas and oil
under pressure.
The pressure must be relieved before disposal to pre-
vent explosion and possible injury when scrapping.
Place the damper on a level surface with its rod extend-
ed and drill a hole of 2-3 mm (0.078-0.118 in)
diameter in the body to release the gas.
Front Damper
Rear Damper
Always wear eye protection to avoid
getting metal shavings in your eyes when the gas
damper pressure is relieved.
18-43