Honda Acura NSX 1991 Service Manual page 481

37. Remove the one bolt of the upper arm mounting bolts,
38. Remove the shift cable cover and shift cable holder.
39. Remove the shift cable from the control lever.
40. Remove the torque converter cover and then remove the drive plate bolts.
UPPER CONTROL
DAMPER
ARM
ARM MOUNTING
BOLT
41. Attach a chain hoist to the transmission hangers.
42. Place a jack under the transmission and raise the transmission just enough to take weight off of the mounts.
43. Remove the front engine mounting bolts on the transmission side and retighten the bolt on the engine side.
Loosen the front engine mounting bolt on the engine side, but do not remove it. After removing the
CAUTION:
two bolts on the transmission side, be sure to retighten the bolt on the engine side.
44. Remove the rear transmission mounting bolts.
45. Remove the transmission housing mounting bolts..
46. Pull the transmission away from the engine until it clears the dowel pins, then lower it on the transmission jack.
REAR TRA
MOUNT
REAR TRANSMISSION
MOUNTING BOLT
TORQUE CONVERTER
COVER
TRANSMISSION JACK
FRONT ENGINE MOUNTING
BOLT [Engine side)
ONT ENGINE MOUNT
TRANSMISSION HOUSING MOUNTING BOLT
DRIVE PLATE
CABLE
SHIFT CABLE
HOLDER
SHIFT CABLE
ION HOUSING
BOLT
ENGINE MOUNTING
(Transmission side)