Honda Acura NSX 1991 Service Manual page 802

(From page 19-I 14)
Is there voltage ?
l Approximately 0.5 V when
completely closed.
completely open.
and 4.5 V (open).
Y E S
control unit and recheck.
a Check for poor connections or
loose wires.
I
Turn the ignition switch OFF.
I
Disconnect the 20-P connector
from the TCS control unit, 8-P
connector from the PGM-FI ECU,
3-P connector from the pedal an-
gle sensor and the 22-P connec-
tor from the A/T control unit.
Check for contrnurty between the
I
I
Check for continuity in
wire between the TCS
control unit and pedal angle
sensor.
a If OK, replace the pedal angle
sensor.
loose wires.
I
2 3 4
the
Repair open in the BLUlRED wire
between the TCS control unit and
pedal angle sensor.
20-P CONNECTOR
WIRE
I
View from terminal side.
View from terminal side.
WIRE
20-P CONNECTOR
I
19-115