Troubleshooting
. Blower Motor kont'd)
From page 22-43
Test the blower high relay: Con-
nect battery power to relay termi-
nal C, then connect terminal D to
body ground. There should be
continuity between terminals A
and 6 with power connected, no
continuity with power discon-
nected.
Y E S
Reinstall the blower high relay.
Remove the climate control unit
(page 22-84).
Disconnect the 30-P connector
from the climate control unit.
Connect a jumper wire between
the ORN/WHT wire terminal and
body ground.
Turn the ignition switch ON.
To page 22-45
Replace the blower high relay.
No.1 2 (ORNIWHT)