Honda Acura NSX 1991 Service Manual page 1284

Cruise Control
CAUTION: Disconnect both the negative and positive bat-
tery cables. Connect the short connector to the airbag
assembly (see page 23-324).
Disconnect the cable reel harness and main harness
6-P connector, and connect the SRS test harness C
only to the cable reel harness side 6-P connector.
HARNESS C
2. Check for continuity between the terminals in each
switch position according to the table.
I\ 3
If OK, go to step 3.
l
3. Remove the switch cover from the SET/RESUME
switch, then separate the SET/RESUME switch by
removing the 2 screws.
I 2 I 1
4. Check for continuity between the terminals in each
switch position according to the tables.
SET (ON) 0
RESUME (ON)
0
0
0