Honda Acura NSX 1991 Service Manual page 528

Transmission
Reassembly
4. Set the parking shift arm in the PARK position.
5 . Measure the distance between the face of the parking
as shown.
DISTANCE: 52.1 - 53.1 mm (2.051 - 2.091 id
DISTANCE
PARKING BRAKE STOPPER
6. If the measurement is out of tolerance, select the ap-
propriate parking brake stopper using the table below,
and install it on the parking shift arm.
PARKING BRAKE STOPPER
PARKING PAWL SHAFT
I
PAWL
Install the special tool as shown, and shift to PARK
7 .
position.
07924-P
Install and torque the new locknuts. Tighten to speci-
8.
fied torque, then loosen and retighten to specified
torque.
TORQUE: 1 4 0 --t 0 + 140 N-m
(14.0 --) 0 -+ 14.0 kg-m, 101 -+ 0 + 1 0 1 lb-ft)
NOTE: Countershaft locknut has left-hand threads.
Stake each locknut into its shaft, using a 3.5 mm
9 .
punch.
SECONDARY
SHAFT
LOCKNUT
1 .O mm (0.04 in1
3.5 mm (0.14 id
RSHAFT
T