Honda Acura NSX 1991 Service Manual page 660

Hub Replacement
NOTE:
Use only genuine Honda aluminum wheel weights. Non-genuine aluminum wheel weights may corrode and damage
l
aluminum wheels.
removel.
CAUTION:
Use a rag at the point you are going to pry, because aluminum alloy wheels can be easily damaged.
*SELF-LOCKING
10 x 1.25 mm
Replace.
Check for wear or rust.
Inspection, section 19.
FLAT SCREW
10 Nom (I .O kg-m, 7 lb-ftl
NUT
HUB BEARING
ASSEMBLY
Inspect for faulty
movement and wear.
2 6 x 1.5mm
335 Nom (33.5 kg, 242 lb-ft)
NOTE: After tightening,use a drift to
stake the spindle nut shoulder against
FRONT HUB
Check for damage or
cracks.
Replacement,
I
p a g e 18-l 7.
12 x 1.5 mm
110 N-m (I 1 kg-m, 80 lb-ft)
ER CAP