Honda Acura NSX 1991 Service Manual page 659

Front Suspension
Torque Specifications
CAUTION:
require 1 N-m (0.1 kg-m, 0.7 lb-ft) of torque to turn the test nut on the bolt).
vehicle should be on the ground before any bolts or nuts connected to rubber mounts or bushings are tightened.
The
NOTE: Wipe off the grease before tightening the nut at the ball joint.
*FLANGE BOLT
1 2 x 1.25
mm
60 Nom (6.0 kg-m, 43 lb-ft)
*SELF-LOCKING NUTS
l-2 x 1.25 mm
*FLANGE BO
1 0 x 1.25mm
60 N*m (6.0 kg-m,
12 x 1.25 mm
95 Nom (9.5 kg-
* SELF-LOCKING N
1 2 x 1.25mm
Replace.
65 Nom (6.5 kg-m, 47 lb-ft)
*FLANGE BOLT
12 x 1.25 mm
95 Nom (9.5 kg-m, 69 lb-ft)
18-14
10 x 1.25 mm
60 Nom
12 x 1.25 mm
6 0 Nom 16.0 kg-m, 4 3 lb-ft]
I
Replace.
44 N-m (4.4 kg-m, 32 lb-ft)
*SELF-LOCKING
1 2 x 1.25 mm
l m (12.5 kg-m, 90 lb-ft)
12 x 1.25 mm
60 N*m (6.0 kg-m, 4 3 lb-ft)
I
.
60 N-m (6.0 kg-m, 43 lb-ft)
NUT
*SELF-LOCKING
.
12 x 1.25 mm
65