Honda Acura NSX 1991 Service Manual page 1060

Ignition Switch
Steering Lock Replacement (cont'd)
9 . Insert the key and turn it to "1".
NOTE: The illustration shows A/T.
10. Push the lock pin and pull out the steering lock as-
sembly.
23-74
11. Turn the key to the "1 ", push the pin and insert the
steering lock assembly into the steering column un-
til the clicks into place.
12. Loosely tighten the new shear bolt.
NOTE: Make sure the projection on the ignition
switch is aligned with the hole in the steering
column.
13. Insert the ignition key and check for proper opera-
tion of the steering wheel lock and that ignition key
turns freely.
14. Tighten the shear bolts until the hex heads twist off.
SHEAR BOLT
PORTION