Honda Acura NSX 1991 Service Manual page 851

the original adhesive remaining around the window
opening flange. The glass should be installed 10
minutes after you apply the primer.
NOTE:
l Do not apply glass primer to the body, and be
careful not to mix up glass and body primer
sponges.
l
Never touch the primed surfaces with your
hands.
flange.
UPPER
FASTENER
UPPER FASTENER
ADHESIVE
TAPE
13. Use suction cups to hold the glass over the open-
ing, align it with the marks made in step 5 and set it
down on the adhesive. Lightly push on the glass
until its edge it fully seated on the adhesive all the
way around.
NOTE: Do not close or open the doors until the
adhesive is dry.
ALIGNMENT MARKS
14. Install the upper molding.