Honda Acura NSX 1991 Service Manual page 694

6. Clean the caliper thoroughly; remove any rust, and
check for grooves or cracks.
7. Install the pad retainers.
W h e n r e u s i n g
reinstall the brake pads in their original positions to
prevent loss of braking efficiency.
8. Apply Molykote M77 to both sides of the inner
shims A and the back of the pads. Wipe excess
grease off the
shims.
9. Install the brake pads.
NOTE:
ing upward.
Wipe excess grease off the shims.
10. Install the brake pad shims correctly.
WEAR
INDICATOR
\
PAD SHIMS
INNER
PAD
t h e p a d s , a l w a y s
P A D RETAINERS
OUTER PAD
11. Push in the pistons so that the caliper will fit over
the pads.
12. Set the caliper down into position, then install the
brake hose bracket bolts and the caliper bolts.
Tighten the bolts to the specified torque.
BRAKE HOSE
BRACKET BOLTS
22 Nom (2.2 kg-m,
13. Depress the brake pedal several times to make sure
the brakes work, then road-test.
NOTE: Clean the mating surface of.the wheel and
hub before installing the wheel.
Contaminated
reduce stopping ability. Keep grease off the discs
or pads.
CALIPER BRACKET BOLTS
10 x 1.0 mm FLANGE BOLT
50 Nom (5.0 kg-m, 36 lb-ft)
brake discs or pads