Honda Acura NSX 1991 Service Manual page 594

l Press the new bearing into the gearbox housing
until it seats using the hydraulic press and spe-
cial tool.
NOTE:
Install the bearing with the wider side of the out-
l
er race toward the bottom of the gearbox.
enter the bearing.
Hydraulic press
07973-6920001
1 1. lnser the steering rack into the cylinder housing, be-
ing careful not to damage the steering rack sliding
surface.
STEERING RACK
12. Install the steering pinion into the gearbox.
NOTE: Do not engage the steering pinion with the
steering rack this time.
13. If the dust seal was removed, drive in the new dust
seal until it bottoms on the step on the rack screw.
14. Grease the sealing lip of the dust seal.
SET SCREW
DUST SEAL
I
Bottom here.