Honda Acura NSX 1991 Service Manual page 1312

Supplemental Restraint System (SRS)
-Troubleshooting
(From page 23-327)
Is there less than
after ignition is first turned on.
Connect the voltmeter be-
tween the No. 6 terminal f + 1
and the No. 7 terminal 1-j
of the floor harness's 30P
connector.
Measure the voltage between
the No. Gterminal and the No.
7 terminal.
Turn the ignition switch OFF.
(To page 23-329)
23-328
(cont'd)
Repair short in No. 9 terminal
(BLU wire) of the floor wire
harness.
Check for continuity between
the No. 7 terminal and body
ground.
Repair open in the No. 6 ter-
wire harness.
YEL BLK
View from terminal side
N O
YES
FLOOR WIRE
CONNECTOR
Repair open in the
No. 7 terminal (BLK
wire) between the
gauge assembly and
body ground or poor
ground (04011.