Honda Acura NSX 1991 Service Manual page 852

Windshield
15. Let-the adhesive dry for at least 1 hour, then spray
water over the glass and check for leaks. Mark
leaking areas and let the glass dry, then seal with
urethane windshield
NOTE:
installation. If the car has to be used within the
first 4 hours, it must be driven slowly.
installation.
the air scoop.
16. Reassemble all removed parts.
20-26
adhesive.
Rear Window
CAUTION:
To remove the rear glass, first remove:
1.
l
Rear upper trim panel (page 20-37).
2.
Remove the weatherstrip.
3. Disconnect the rear defogger sub-harness and
ground cable/antenna lead, then remove the
grommets.
WEATHERSTRIP
SPECIAL BOLT
CABLE