Honda Acura NSX 1991 Service Manual page 1146

Integrated Control Unit
CAUTION:
l All SRS electrical wiring harnesses are covered with
yellow outer insulation.
l Replace the entire affected SRS
if there is an open circuit or damage to the wiring.
Remove the left side kick panel cover, and the dash re-
lay holder from the bracket, to disconnect the 16-P con-
nector from the integrated control unit.
Remove the integrated control unit from the dash fuse
box.
Make the following input tests at the harness pins.
If all tests prove OK, yet the system still falls to work,
replace the control unit.
NOTE: Several different wires have the same color.
They have been given a number suffix to distinguish
them (for example YEL' and YEL2 are not the same).
harness assembly
BOX
\ iELi
View from wire side