Honda Acura NSX 1991 Service Manual page 838

Doors
Assemble the door in the reverse order of disassembly,
and also:
Grease all the sliding surfaces of the window
1 .
regulator and the glass guides where shown.
FRONT GLASS GUIDE
2. Roll the glass up and down to see if it moves freely
without binding. Also make sure that there is no
clearance between the glass and door upper
weatherstrip when the glass is closed. Adjust the
position of the door glass as necessary (pages
20-I 3 to 17).
3. Attach the wire harness correctly on the door.
NOTE: Make sure the wires are not pinched.
4. When reinstalling the plastic cover, apply adhesive
along the edge where necessary to maintain a con-
tinuous seal and prevent air/water leaks.
NOTE: Do not fill up with adhesive.