Honda Acura NSX 1991 Service Manual page 533

19. Install the right driveshaft on the intermediate shaft.
20. Install the castle nut on the lower arm at the knuckle.
21. Install the damper fork bolt.
22. Install the castle nut on the control arm at the knuckle.
CAUTION: Make sure that the reference marks on the control arm are aligned.
23. Install the ALB sensor wire clamp and parking brake cable holder.
bolt/nut
10 N-m
10 N-m
24. Install the front exhaust pipe A.
25. Install the rear beam rod.
26. Install the parking brake cable.
SELF-LOCKING NUT
Replace.
34 N.m
(3.4 kg-m, 25 lb-ft)
Replace.
12x 1.25mm
95 N.m (9.5 kg-m, 69 lb-ft)
Replace.
12 x 1.25 mm
65 N.m (6.5 kg-m, 62 lb-ftl
60 N-m (6.0 kg-m, 69 lb-ft)
SELF-LOCKING NUT
Replace.
10x 1.25mm
66 N.m (5.5 kg-m, 40 lb-ftl
DAMPER FORK BOLT
Replace.
10x 1.25mm
44 N-m
14.4 kg-m, 32 lb-ft)
Replace.
12x 1.25mm
COTTER PIN
60 N-m
Replace.
(6.0 kg-m, 43 lb-ft)
95 N-m
(9.5 kg-m, 69 lb-ft)