Reverse Shift Fork
Assembly
Disassembly/Reassembly
NOTE: The spring pin grooves should be 180°
apart.
REVERSE SHIFT FORK
SHAFT
L o n g
Disassembly:
Remove with the 3 mm spring pin and 5 mm spring pin.
Reassembly:
Install the 5 mm spring pin first, then install the
3 mm spring pin.
REVERSE SHIFT FORK
Inspection, page
13-l 4
mm
5 x 25
SPRING PIN
x
mm
3
Replace.
5 mm PIN PUNCH
Mainshaft, Countershaft,
Differential
Assemblies
1 .
Remove the change holder assembly from the
clutch
housing.
2.
Remove
the
mainshaft
assembly with the shift fork from the clutch
housing.
NOTE: Tape the mainshaft splines to protect them
before removing the mainshaft and countershaft
assemblies.
MAINSHAFT
ASSEMBLY
assembly
and
countershaft
COUNTERSHAFT
/ A S S E M
L Y
B