Honda Acura NSX 1991 Service Manual page 1299

Trunk Latch Switch Test
1 . Open the trunk lid and remove the trunk rear trim
panel.
2 . Disconnect the 3-P connector from the trunk latch.
3. There should be continuity between the B and C ter-
minals with the trunk lid opened.
TRUNK LATCH
3-p CONNECTOR
4. There should be no continuity with the trunk latch
in LOCK (trunk lid closed) position.
NOTE: Be careful not to damage the door trim panel
when remove it.
1 . Remove the door trim panel (See section 20).
2. Disconnect the 2-P connector from the door switch.
NER
DOOR SWITCH (microswitch type)
3. There should be continuity between the A terminal
and B terminal with the door opened.
4. There should be no continuity with the switch
pushed (door closed).
23-315