Honda Acura NSX 1991 Service Manual page 879

Rear Hatch/Engine Cotier
CAUTION: Use fender covers to avoid damaging painted surfaces.
Remove the engine cover.
1 .
Remove the harness cover and disconnect the rear defogger and antenna lead connectors.
2:
Remove the rear hatch by removing the support struts mounting bolts and rear hatch mounting bolts.
3.
NOTE:
installation is the reverse order of removal.
4.
NOTE:
CONNECTOR
REAR DEFOGGER
CONNECTOR
- -
* 8 x 1.25mm
22 Nom (2.2 kg-m.
16 lb-ft)
I
I
ROD HOLDER
Turn the holder 45O to
r e m o v e i t .
I
LE
REAR HATCH
ASSEMBLY
H
I N G E
HINGE MOUNTING NUTS
22 N-m (2.2 kg-m, 16 lb-ft)
10 Nom (1.0 kg-m,
7 lb-ft)
mm
(1.0 kg-m,
fit flush with the body.
SHIM
Use shims es required to
, make the latch fit flush
with the body at the rear
edge.
I
I
Adjust the rear hatch fit
to the hatch opening by
E N G I N E
COVER
0 Nm (I .O kg-m
lb-ft)
ADJUSTMENT
CONNECTOR
20-53