Honda Acura NSX 1991 Service Manual page 864

Seats
Replacement
NOTE:
can see its mounting bolts and seat mount cover
caps.
l
Take care not to scratch the interior trim, dashboard
and center armrest.
l
quid thread lock.
1.
Pry out the seat mount cover caps.
2. Remove the seat mounting bolts, then remove the
seat and disconnect the connector.
3. Pry out the lower anchor bolt cap and remove the
. . . .
seat belt rower ancnor
10 x 1.25 mm
40 Nom (4.0
NOTE: Grease the moving surface of the slide
gears.
POWER SLIDE CABLE
NOTE: Take
29 lb-ft)
kg-m,
care not to bend the cable.
SEAT MOUNT
COVER CAP
I
INNER SLIDE
POWER SEAT
SWITCH
Disconnect the connectors.
SEAT ASSEMBLY
0
kg-m.
ANCHOR
BOLT tiAP
LOWER ANCHOR
OUTER SLIDE