Pressure Plate, Clutch Disc Mid Plate Installation - Honda Acura NSX 1991 Service Manual

Pressure Plate, Clutch Disc
Mid Plate
Installation
NOTE:
is a set.
clutch disc has a flat plate between the two friction
surfaces. The 1st clutch disc has a spring plate bet-
ween the two friction surfaces.
1 . Install the damper washer and spring collar.
SPRING
Install the ring gear holder.
2.
Install the 2nd clutch disc.
3.
NOTE: The index mark on the 2nd clutch disc
should face away from the flywheel.
CLUTCH ALIGNMENT SHAFT
Turn the groove to
the out side.
RING GEAR HOLDER
or
4. Install the mid plate.
NOTE: Align the mark on the flywheel with the
mark on the mid plate.
A l i g n t h e marks.
5. Install the 1st clutch disc.
NOTE:
should be 180° a part.
l
The index mark on the 1st clutch disc should
face away from the flywheel.
1st CLUTCH DISC
MARKS