Honda Acura NSX 1991 Service Manual page 661

Front Suspension
Hub Replacement
Loosen the wheel nuts slightly.
I .
Raise the front of car and support on safety stands
in proper locations (See section I).
3. Remove the wheel nuts and wheel.
NOTE: Before installing the wheel, clean the
mating surfaces of the brake disc and inside of the
wheel.
4 . Remove the brake hose mounting bolts.
*Corrosion resistant bolt/nut
110 N-m
FRONT BRAKE HOSE
7 lb-ft)
5. Remove the speed sensor from the knuckle and
front lower control arm, but do not disconnect it.
NOTE: Be careful when installing the sensors to
avoid twisting wires.
6. Remove the caliper bracket mounting bolts and
hang the caliper assembly to one side.
CAUTION: To prevent
caliper assembly or brake hose, use a short piece of
w i r e t o h a n g t h e c a l i p e r a s s e m b l y f r o m t h e
undercarriage.
CALIPER BRACKET MOUNTING BOLTS
110 N*m (11 .O kg-m, 80 lb-ft)
accidental to the