Honda Acura NSX 1991 Service Manual page 1323

CAUTION:
Be sure to install the SRS wiring so that it is not
l
pinched or interfering with other car parts.
Be sure the battery cables are disconnected.
l
1 . Place the airbag assembly on the steering wheel, and
secure it with new TORX @ bolts.
Replace.
2. Disconnect the short connector from the airbag con-
nector.
SHORT
CONNECTOR
TORX @ BOLT
7 lb-W Replace.
ASSEMBLY
MAINTENANCE
3. Connect the airbag 3-P connector and cable reel 3-P
connector.
4. Attach the short connector to lid A, then reinstall the
lid on the steering wheel.
5 . Connect the battery positive terminal and then con-
nect the negative terminal.
6. After installing the airbag
system opration:
SRS indicator light should go on for about 6 se-
conds and then go off.
a Confirm operation of cruise control set/resume
switch.
1
assembly, confirm proper