Honda Acura NSX 1991 Service Manual page 991

l For the connector which uses insulation grease,
clean the connector then apply grease if the grease is
insufficient or contaminated.
securely locked.
have to push and the other you should not touch
when connecting the connector. Check the shape of
the locking tab before connecting.
l The locking tab having a taper end should not be
touched when connecting.
l The locking tab with an angle end should be pushed
when connecting.
securely.
connector.
damage. Also make sure that the female connector
is tight and not loosened from the previous use.
fully until they will no longer go.
l
Be sure that plastic cover is placed over the
connection.
faces down.
GOOD
their respective wire bands at the designated
locations.
Position the wiring in the bands so that only the in-
sulated surfaces contact the wires or harnesses.
NO GOOD
n n n n