Honda Acura NSX 1991 Service Manual page 386

12. lnstafl a new set ring on the end of the left driveshaft and intermediate shaft.
13. Install the left driveshaft.
14. Install the lower arm to the side beam.
CAUTION: Align the reference marks on the adjusting bolt, adjusting cam and lower control arm.
15. Install the damper fork bolt.
16. Install the ball joint nut to the toe control arm at the knuckle.
CAUTION: Make sure that the arrow marks on the toe control arm are aligned.
17. Install the ALB sensor wire clamp and parking brake cable holder.
Replace.
12 x 1.25 mm
95 N*m (9.5 kg-m, 69 lb-ft),
1 0
II .O ko-m. 7 lb-ftb
125 N-m
(12.5 kg-m, 90 lb-ftl
18. Install the intermediate shaft and tighten the intermediate shaft mounting bolts to the intermediate shaft support
base.
19. Install the intermediate shaft heat cover.
I
BOLT
SET
8 x 1.25
I
CAM
95 N-m (9.5 kg-m, 69 lb-ft)
6x l.Omm
10 N-m (I .O
mm
lb-ft)
9 5 Nom
(9.5 kg-m, 69 lb
NUT
kg-m, 7 lb-ft)
13-49