Honda Acura NSX 1991 Service Manual page 873

Front Bumper
1 . Loosen the mounting screw, then pull the right and left front turn signal lights out and disconnect the connectors.
2. Remove the skirt covers, then remove the 3 bumper mounting bolts on each side, and lower skirt mounting bolt.
3. Lower the inner fender, then remove the 2 bumper mounting nuts and the skirt mounting bolts from inside the front
fender on each side.
4. Lift and remove the bumper assembly.
NOTE:
HOOK
(Bumper beam side)
BUMPER MOUNTING BOLTS -
(2.2 kg-m, 18 lb-ft)
I / -
SKIRT
5. To install, insert the bumper beam hooks into the bumper bracket holes, and install parts in the reverse order of
removal.
HOLE
(Bumper bracket side)
LOWER SKIRT MOUNTING
BOLT
C VE
O R
I
SKIRT MOUNTING BOLTS
10 N-m (1.0 kg-m,
SIGNAL LIGHT
SKIRT COVER
BUMPER MOUNTING NUTS
10 N*m (1.0 kg-m,
NER FENDER
FRONT BUMPER
FRONT TURN
SIGNAL LIGHT