Honda Acura NSX 1991 Service Manual page 990

Troubleshooting
-Troubleshooting Precautions (cont'd)
the bracket.
tor tightly (to provide clearance to the locking
device), then operate the tab fully and remove the
connector in the designated manner.
mating connector by holding on both connectors.
their wires.
0
GOOD
NO GOOD
23-4
.
LOCKING PAWL
after reconnecting. Also check that the cover is not
distorted.
NO GOOD
terminals are in place and not bent or distorted.
NO GOOD
The illustration shows examples of terminal and seal
abnormality.
RETAINER
NO GOOD
\ I
RUBBER B/AL
GOOD
RUBBER SEAL