Honda Acura NSX 1991 Service Manual page 525

Transmission
NOTE: Coat all parts with ATF.
1 . Reassemble the valve bodies in the following numbered sequence.
CAUTION: To prevent stripping the threads, press down on the accumulator cover while installing the bolts.
TORQUE:
all bolts
6 x 1 .O mm:
6 x 1 .O mm: 0,: 14 N-m (1.4
except @: 12 N-m (1.2 kg-m, 9 lb-ft)
kg-m, 10
lb-ft)
NOTE: Install the oil pump driven gear
with its chamfered side facing down.
NOTE: Install the oil pump driven gear with
its chamfered side facing down.
DRIVE GEAR
rotates smoothly in the normal operating
direction and the pump shaft moves
smoothly in the axial and normal operating
directions.
CAUTION: If the pump gear and pump
shaft do not move freely,
body
bolts, realign the shaft, and then
retighten to the specified torque. Failure to
align the pump shaft correctly will result in
seized pump gear or pump shaft.
DRIVEN
GEAR
SHAFT
DRIVEN
GEAR
Chamfered side faces
separator plate.
loosen the valve
(cont'd)