Honda Acura NSX 1991 Service Manual page 466

Linear Solenoid
4. Select a new shim from the chart below.
NOTE: Identification color is painted on the side of
the shim.
LINEAR SOLENOID SHIM
1
2
3
4
9
14-82
LINEAR SOLENOID
THICKNESS
COLOR
1.2 m m
BLACK
(0.047 in)
1.4 m m
BROWN
in)
(0.055
1.6 m m
RED
(0.063 in)
1.8 m m
PINK
(0.071 in)
2.8 mm
WHITE
(0.110 in)
5. Apply liquid gasket to both sides of the linear
solenoid shim as shown. Use liquid gasket Part No.
08718-550000 OE.
CAUTION:
applying the liquid gasket.
After installation, wipe off any liquid gasket, that
l
squeezed out from around the linear solenoid
shlm.
NOTE:
Check that the mounting surfaces are clean and
l
dry before applying liquid gasket. Degrease if
necessary.
passed since you first applied the liquid gasket.
If 10 minutes has passed, reapply liquid gasket
after removing the residue.
l Wait at least 30 minutes before filling with oil.
6. Install the linear solenoid and shim to the
transmission housing.
6 x l.Omm
Replace.
LINEAR SOLENOID
apply
Do not liquid gasket
here on either side.
Apply liquid gasket
here on both side.
in)
Clean mounting surface.
\