Siemens SINUMERIK 828D Commissioning Manual page 89

<BOOK ref="index.html" title="OEM_CYCLES" helpdir="hmi_prog_help">
</BOOK>
</HMI_SL_HELP>
● Language-dependent file "<prog_help_eng>.ts": this filename is permanently specified.
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<!DOCTYPE TS>
<TS>
</TS>
Saving help files in the target system
Procedure:
1. Copy the configuration file "prog.ini" to the following directory:
/oem/sinumerik/hmi/cfg
2. Copy the file "slhlp.xml" to the help book in the following directory:
/oem/sinumerik/hmi/cfg
CNC commissioning
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
<ENTRY ref="cycle1_help.html" title="Cycle1"></ENTRY>
<ENTRY ref="cycle2_help.html" title="Cycle2"></ENTRY>
<ENTRY ref="cycle3_help.html" title="Cycle3"></ENTRY>
<ENTRY ref="cycle4_help.html" title="Cycle4"></ENTRY>
<ENTRY ref="cycle_help.html" title="OEM_Cycles"></ENTRY>
<context>
<name>oem_cycles</name>
<message>
<source>CYCLE1</source>
<translation>short description for cycle 1</translation>
<chars>*</chars>
</message>
<message>
<source>CYCLE2</source>
<translation>short description for cycle 2</translation>
<chars>*</chars>
</message>
<message>
<source>CYCLE3</source>
<translation>short description for cycle 3</translation>
<chars>*</chars>
</message>
</context>
Operating software settings
3.7 Creating OEM-specific online help
75