Siemens SINUMERIK 828D Commissioning Manual page 494

Configuring cycles
7.5 Turning
MD24110 $MC_TRAFO_AXES_IN_1[ ]
[0] = 1
[1] = 3
[2] = 2
MD24120 $MC_TRAFO_GEOAX_ASSIGN_TAB_1[ ]
[0] = 1
[1] = 3
[2] = 2
MD24900 $MC_TRANSMIT_ROT_AX_OFFSET_1
= 0
MD24905 $MC_TRANSMIT_ROT_AX_FRAME_1
= 2
MD24910 $MC_TRANSMIT_ROT_SIGN_IS_PLUS_1
= 0
MD24911 $MC_TRANSMIT_POLE_SIDE_FIX_1
= 1
MD24920 $MC_TRANSMIT_BASE_TOOL_1[ ]
[0] = 0
[1] = 0
[2] = 0
TRANSMIT with real Y axis
MD24100 $MC_TRAFO_TYPE_1
= 257
MD24110 $MC_TRAFO_AXES_IN_1[ ]
[0] = 1
126
Perpendicular to the rotary axis X1
Rotary axis (main spindle) C1
Parallel to the rotary axis Z1
1st channel axis X1
2nd channel axis Y1
3rd channel axis Z1
Offset of the rotary axis for the 1st TRANSMIT transformation.
Axial offset of the rotary axis is taken into account during TRANSMIT 1.
Sign of the rotary axis for the 1st TRANSMIT transformation.
Limitation of working range in front of/behind the pole, 1st TRANSMIT.
Definition of transformation 1 in the channel: TRANSMIT main spindle.
Perpendicular to the rotary axis X1
Axis assignment for the 1st transforma‐
tion in the channel
Assignment of the geometry axes to chan‐
nel axes for transformation 1
Vector of the base tool for the 1st TRANS‐
MIT transformation.
Axis assignment for the 1st transforma‐
tion in the channel.
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate