Configure The Tool Lists - Siemens SINUMERIK 828D Commissioning Manual

Tool management
9.2 Configuring the user interface
</SETTINGS>
9.2.2

Configure the tool lists

<LISTCONFIGURATION> tag
The entries used for configuring the following list views are located in the
<LISTCONFIGURATION> tag:
● "Tool List" window, identifier <SlTmToollistForm>, see the 1st example.
● "Tool Wear" window, <SlTmToolwearForm> identifier
● "Magazine" window, <SlTmToolmagazinForm> identifier
● "Tool Data OEM" window, <SlTmTooloemForm>identifier
This window is hidden in the default configuration. The window is only displayed when you
enable it with <Enabled>, see the 3rd example.
● "Tool Selection" window, <SlTmToolselectionForm> identifier: In order to select a tool
this window can be displayed in the program input screen.
Entry
Enabled
CAPTION
COLUMNX
TOOLTYPE_ALL
TOOLTYPE_XXX
EMPTY_MAG_PLACE
Item
DELETE_COLUMN
INSERT_COLUMN
236
<AccessLevelWriteDetailsAllParameter value="4" type="int" />
Meaning
True - window is displayed.
False - window is hidden.
Definition of the list name.
See 1st example: "Tool list" appears on the user interface for the
"TM_CAPTION_TOOLLIST" identifier.
Column selection: X stands for the column number.
The column setting applies to all tool types.
The column setting applies to a particular tool type. XXX stands for the
number of the tool type.
The column setting applies to an empty magazine location. Empty mag‐
azine locations appear in a list sorted according to magazine.
Identifier of the list parameter.
See example: The column in which the magazine number and magazine
location are displayed is created for the "ToolInMagInPlace" identi‐
fier.
Tool parameter identifiers (Page 240)
Cutting parameter identifiers (Page 242)
Monitoring parameter identifiers (Page 244)
Magazine location parameter identifiers (Page 246)
Delete column.
Insert column.
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate