Siemens SINUMERIK 828D Commissioning Manual page 911

– E.g. read, write, setup monitoring
– The attributes of a NodeID can be queried via the entry "View Attributes". One of these
SINUMERIK Integrate for Engineering Access MyMachine / OPC UA
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
Figure 3-8 NodeID "Sinumerik > Channel > Parameter > R"
attributes is the "Value", which provides the corresponding value of R1.
Figure 3-9 Viewing node attributes
Testing the connection
19